- 文章
- 196
- 積分
- 219
- 會員註冊
- 23 點
- 註冊時間
- 2007-10-13
- 最後登錄
- 2010-6-21
|
34篇
發表於 2008-9-6 18:39 只看該作者
Which DScaler you are using ? 4.1.17 ?
http://sourceforge.net/project/showfiles.php?group_id=7420引用:C:\Program Files\DScaler\cx2388xCards.ini
[Leadtek WinFast TV2000 XP Expert (Ntsc)]
;Comments:
;Card variant with Ntsc-Tuner
;
;Please close your PVR and IR apps in system tray to
;get audio before you start DScaler.
;Thanks Alan Erickson
;v4l card: #5
AutoDetectID = 0x6613107D
DefaultTuner = philips_4in1
Input ( "Tuner", tuner)
MuxSelect = 0
GPIOSet ( 0x00f5e700, 0x00003004, 0x00f5e700, 0x02000000 )
Input ( "Composite", composite )
MuxSelect = 1
GPIOSet ( 0x00f5c700, 0x00003004, 0x00f5c700, 0x02000000 )
Input ( "S-Video", svideo )
MuxSelect = 2
GPIOSet ( 0x00f5c700, 0x00003004, 0x00f5c700, 0x02000000 )
Final ()
MuxSelect = 0
GPIOSet ( 0x00f5e704, 0x00003004, 0x00f5e704, 0x02000000 )
UseTDA9887 ()
SetModes ( pal-bg ) = { OutputPort1 = active, OutputPort2 = active } ; OK
SetModes ( pal-i ) = { OutputPort1 = active, OutputPort2 = active } ; ???
SetModes ( pal-dk ) = { OutputPort1 = active, OutputPort2 = active } ; OK
SetModes ( ntsc-m ) = { intercarrier, OutputPort1 = active } ; ???
SetModes ( secam-l ) = { OutputPort2 = active } ; OK Check the TDA9887 setting for the NTSC-M (SetModes ( ntsc-m ) = { intercarrier, OutputPort1 = active } ; ???)
Or the SSID of your card is not 0x6613107D (AutoDetectID = 0x6613107D) ?
is 0x6F26107D ?
Or it is PAL VERSION 0x6611107D : 引用:;Thanks Sorin Siron
;Thanks Daniel Wojcik
;Thanks Brian Bennefeld
;Thanks Herv?
;v4l card: #5
AutoDetectID = 0x6611107d
DefaultTuner = philips_fm1216me_mk3
Input ( "Tuner", tuner)
MuxSelect = 0
GPIOSet ( 0x00f5e700, 0x00003004, 0x00f5e700, 0x02000000 )
Input ( "Composite", composite )
MuxSelect = 1
GPIOSet ( 0x00f5c700, 0x00003004, 0x00f5c700, 0x02000000 )
Input ( "S-Video", svideo )
MuxSelect = 2
GPIOSet ( 0x00f5c700, 0x00003004, 0x00f5c700, 0x02000000 )
Final ()
MuxSelect = 0
GPIOSet ( 0x00f5e704, 0x00003004, 0x00f5e704, 0x02000000 )
UseTDA9887 ()
SetModes ( pal-bg ) = { OutputPort1 = active, OutputPort2 = active } ; OK
SetModes ( pal-i ) = { OutputPort1 = active, OutputPort2 = active } ; ???
SetModes ( pal-dk ) = { OutputPort1 = active, OutputPort2 = active } ; OK
SetModes ( ntsc-m ) = { intercarrier, OutputPort1 = active } ; ???
SetModes ( secam-l ) = { OutputPort2 = active } ; OK PS : DSCALER 用自己的驅動程式, 不採用微軟的驅動程式架構.
[ 本文最後由 STYX 於 2008-9-7 00:21 編輯 ]
|