列印

【軟體】WinFast PVR2 軟體 (2.0.3.46)

DSCaler 和 PAE 無關.

TOP

電視卡沒有"32位元操作系統中實現4g以上記憶體的兼容性"問題.
電視卡有"64位元操作系統中實現4g以上記憶體的兼容性"問題.

因為電視卡的晶片都是"32-bit DMA",
如果沒有處理正確,就會有"64位元操作系統中實現4g以上記憶體的兼容性"問題 :
For example, PVR-150 : http://www.hauppauge.co.uk/board ... f822bb6&t=15219

[ 本文最後由 STYX 於 2008-9-6 18:14 編輯 ]

TOP

UPDATE the latest MB BIOS first.
And check the memory remapping setting if it is exist in the BIOS SETUP.
Second, use "Windows Update" to update the up-to-date patches.
Third, update the latest Microsoft DirectX End-User Runtimes (August 2008) :
http://www.microsoft.com/downloa ... &displaylang=en

Post the MB and hardware information.
(Run dxdiag and upload the dxdiag.txt)
Check the TV2000 XP EXPERT driver verison which your are using.
Here is the latest version 6.0.109.61 (09/01/2008) Beta :
http://tw1965.myweb.hinet.net/Leadtek/EagleXT.6.0.109.61.zip

TOP

Which DScaler you are using ? 4.1.17 ?
http://sourceforge.net/project/showfiles.php?group_id=7420
引用:
C:\Program Files\DScaler\cx2388xCards.ini
[Leadtek WinFast TV2000 XP Expert (Ntsc)]
;Comments:
;Card variant with Ntsc-Tuner
;
;Please close your PVR and IR apps in system tray to
;get audio before you start DScaler.

;Thanks Alan Erickson
;v4l card: #5
AutoDetectID = 0x6613107D
DefaultTuner = philips_4in1

Input ( "Tuner", tuner)
        MuxSelect = 0
        GPIOSet ( 0x00f5e700, 0x00003004, 0x00f5e700, 0x02000000 )

Input ( "Composite", composite )
        MuxSelect = 1
        GPIOSet ( 0x00f5c700, 0x00003004, 0x00f5c700, 0x02000000 )

Input ( "S-Video", svideo )
        MuxSelect = 2
        GPIOSet ( 0x00f5c700, 0x00003004, 0x00f5c700, 0x02000000 )

Final ()
        MuxSelect = 0
        GPIOSet ( 0x00f5e704, 0x00003004, 0x00f5e704, 0x02000000 )

UseTDA9887 ()
        SetModes ( pal-bg   ) = { OutputPort1 = active, OutputPort2 = active } ; OK
        SetModes ( pal-i    ) = { OutputPort1 = active, OutputPort2 = active } ; ???
        SetModes ( pal-dk   ) = { OutputPort1 = active, OutputPort2 = active } ; OK
        SetModes ( ntsc-m   ) = { intercarrier, OutputPort1 = active }         ; ???
        SetModes ( secam-l  ) = { OutputPort2 = active }                       ; OK
Check the TDA9887 setting for the NTSC-M (SetModes ( ntsc-m   ) = { intercarrier, OutputPort1 = active }         ; ???)
Or the SSID of your card is not 0x6613107D (AutoDetectID = 0x6613107D) ?
is 0x6F26107D ?

Or it is PAL VERSION 0x6611107D :
引用:
;Thanks Sorin Siron
;Thanks Daniel Wojcik
;Thanks Brian Bennefeld
;Thanks Herv?
;v4l card: #5
AutoDetectID = 0x6611107d
DefaultTuner = philips_fm1216me_mk3
Input ( "Tuner", tuner)
        MuxSelect = 0
        GPIOSet ( 0x00f5e700, 0x00003004, 0x00f5e700, 0x02000000 )

Input ( "Composite", composite )
        MuxSelect = 1
        GPIOSet ( 0x00f5c700, 0x00003004, 0x00f5c700, 0x02000000 )

Input ( "S-Video", svideo )
        MuxSelect = 2
        GPIOSet ( 0x00f5c700, 0x00003004, 0x00f5c700, 0x02000000 )

Final ()
        MuxSelect = 0
        GPIOSet ( 0x00f5e704, 0x00003004, 0x00f5e704, 0x02000000 )

UseTDA9887 ()
        SetModes ( pal-bg   ) = { OutputPort1 = active, OutputPort2 = active } ; OK
        SetModes ( pal-i    ) = { OutputPort1 = active, OutputPort2 = active } ; ???
        SetModes ( pal-dk   ) = { OutputPort1 = active, OutputPort2 = active } ; OK
        SetModes ( ntsc-m   ) = { intercarrier, OutputPort1 = active }         ; ???
        SetModes ( secam-l  ) = { OutputPort2 = active }                       ; OK
PS : DSCALER 用自己的驅動程式, 不採用微軟的驅動程式架構.

[ 本文最後由 STYX 於 2008-9-7 00:21 編輯 ]

TOP

Windows XP/Vista  和 Windows Server 2003/2003 R2/2008 是不一樣.
Windows Server 會將多媒體功能關掉.
Windows Server 2003 還有選項讓你啟用.
Windows Server 2003 R2 ?
Windows Server 2008 就只能借用 Windows Vista SP1 的程式
引用:
BDA (TV Tuner) support for Server 2008 x86 and x64 :
http://www.msfn.org/board/BDA-Tv ... r-2008-t114549.html

Support for Windows Server 2008 - How To :
http://www.hauppauge.co.uk/board/showthread.php?t=14850
...
http://www.hauppauge.co.uk/board ... ?t=14850&page=9
引用:
大家對很多名詞的定義不同.
所以經常"雞同鴨講".

軟體 = "應用程式" ?
or
軟體 = "應用程式" + "驅動程式" ?

軟體的問題是出在"應用程式" or "驅動程式" ?

"驅動程式"的問題是出在"驅動程式" ? OS (For example, Server 2008)? BIOS ?
This is a "邏輯" question.
To make sure it is not OS relatived,
Also, you should compare "Windows XP SP3 32-bit OS"  .vs. "Windows Server 2003 SP2(SP3?) 32-bit OS" for the 4GB issue.
(PAE is supported only on 32-bit versions of the Windows operating system. 64-bit versions of Windows do not support PAE.)
引用:
PAE (Physical Address Extension) 和 AWE (Address Windowing Extensions) :
http://support.microsoft.com/kb/283037
http://support.microsoft.com/kb/929605
程式呼叫AWE就能夠用到 PAE 的記憶體 (Main Memory).
大部份程式都不支援AWE.
新的RAM Disk程式都支援AWE.
引用:
Different PAE settings :
http://www.microsoft.com/whdc/sy ... ver/PAE/PAEdrv.mspx
The PAE kernel can be enabled automatically without the /PAE switch present in the boot entry if the system has DEP enabled (/NOEXECUTE switch is present) or the system processor supports hardware-enforced DEP. Presence of the /NOEXECUTE switch on a system with a processor that supports hardware-enforced DEP implies the /PAE switch. If the system processor is capable of hardware-enforced DEP and the /NOEXECUTE switch is not present in the boot entry, Windows assumes /NOEXECUTE=optin by default and enables PAE mode.
...
The /PAE, /NOLOWMEM and /3GB switches, and the registry change, can be used at once. Note that /3GB will prevent access to physical memory beyond 16 GB because the kernel memory space is reduced with the /3GB switch, and thus does not have enough room for the additional Page Table Entries required when memory is larger than 16 GB.
http://support.microsoft.com/kb/283037/zh-tw
http://support.microsoft.com/kb/833721
[ 本文最後由 STYX 於 2008-9-6 23:50 編輯 ]

TOP

Q: 怎么調也調不出用dscaler播放時的鮮艷色彩 ?
A: 因為 DSCALER 有做 Post Processing (Filters).

PS : DSCALER 不採用微軟的DirectShow. 所以DSCALER 的 Filters (Gamma, Sharpness, ...etc.), Calibration 是無法給DirectShow 應用程式直接拿來用.
http://sourceforge.net/project/showfiles.php?group_id=7420

[ 本文最後由 STYX 於 2008-9-6 20:25 編輯 ]

TOP

引用:
原文由 nickshih 於 2008-9-14 09:59 發表
這版PVR2在VISTA32  SP1底下沒辦法正常運作耶

他會出現demultiplex的問題,系統無法成功建構
再重裝一次(因為ArcSoft Codec/Filters沒有裝好).

Step 1 : Run the setup program and select the UnInstall, ..., Restart Windows Vista
Step 2 : After boot the Windows Vista, run the setup program to install

[ 本文最後由 STYX 於 2008-9-15 13:59 編輯 ]

TOP

2.0.3.16 正式版感覺問題很多,
不知道Leadtek官方有沒有收到廣大使用者(?)的意見回饋,
這版本雖貴為正式版,但我用了半小時候就反安裝了 orz...

TOP

引用:
原文由 c5158z 於 2009-1-15 11:41 發表
hi all:
請問一下,WinFast PVR3000 Deluxe這張卡有個問題困擾我很久了,換了不少版WinFast PVR2軟體,情況是剛開始啟動WinFast PVR2軟體轉台很順很正常,但是只要看了一段時間以後,轉台就開始變頓頓的,並且轉台會有答的 ...
您要不先提供一下完整的軟硬體細節&PVR2的設定畫面呢?
這樣大家比較能幫您看看可能是那邊的問題...:ehh
以利相交,利盡則散;以勢相交,勢敗則傾;
以權相交,權失則棄;以情相交,情斷則傷;
唯以心相交,方能成其久遠。

TOP

Please update the first post with changelog.
Thanks.

TOP